Learn the Basics of the ecobeee by Carrier® from Air Comfort Service
0:00 — Welcome
"Welcome to your new ecobee for Carrier smart thermostat, installed by Air Comfort Service. Let's walk through the four things you'll use most."
0:09 — Read your screen
"First, your home screen. Up top you'll see your system status and the menu button. In the middle is your indoor humidity, and the large number is your current temperature. The rounded button just below it is your set-point — when you've changed it, it shows Holding."
0:26 — Change the temperature
"To change the temperature, tap the set-point, then use the plus and minus buttons, or slide the dial, to set it. Let go, and your ecobee holds it until the next scheduled change."
0:38 — Switch heat and cool
"To switch between heating and cooling, tap the menu button, then open System Mode and choose Heat, Cool, Auto, or Off."
0:46 — Comfort settings and fan
"Leaving the house? Tap the menu again, open Comfort Setting, and pick Home, Away, or Sleep to save energy. You can also run the fan from here anytime to keep the air moving."
0:58 — Recap
"That's it — read your screen, set the temperature, switch heat and cool, and choose your comfort setting. Anything more, the full ecobee guide and our team are here to help."
1:08 — Endscreen